At present, the new and old users in various areas whether to understand the drum gear coupling how to lubricate some content? The manufacturer believes that more customers are confused by this problem, so the following new and old customers to follow our manufacturer's small series together to understand it.

The manufacturer will take you to understand the lubrication of the drum gear coupling:

1. Strong lubrication. The lubricating oil is injected into each small hole at the bottom of the gear teeth, and the oil enters the meshing surface under the action of centrifugal force, which plays the role of lubrication and cooling. The oil flows from both sides of the tooth after the meshing surface. This type of lubrication, the oil flow circulation is constant, the magazine will flow out, and the oil injected into the centrifugal force caused by the pressure into the tooth meshing surface, so it has a good lubrication and cooling effect, suitable for high-speed heavy duty occasions.

2. Storage lubrication. The lubricating oil is shot into the nozzle, and the corresponding lubricating oil layer is maintained in the outer circle of the gear due to the centrifugal force of the lubricating oil during rotation. This lubrication mode will make the magazine residual and ring, and the heat dissipation effect of the oil flow is poor, so it is only suitable for the occasion of small power and low speed. There is also a non-flowing oil storage lubrication mode of this type, that is, the grease is poured into the inside and sealed, and washed and replaced regularly.

3. Self-flow lubrication. The lubricating oil is shot into the nozzle, flows through the gear backlash, and flows out of the sleeve hole. This lubrication mode mainly plays a cooling role, and it is difficult to form an oil film. The tooth surface wear is faster than the following strong lubrication.

The above is the lubrication method of the drum gear coupling introduced by the mechanical manufacturer. I believe that you will bring some help to you in the process of using the coupling in the future. You can consult our manufacturer in time if you have any questions you do not understand in the future.